Rohloff Speedhub 500/14 TS 8042 (68042) black

Rohloff Speedhub 500/14 TS 8042 (68042) black

is necessary for mounin in frames with horizontal dropout slots

Scope of delivery:

Threaded Axle hub
Shifter
Wires
internal gear mech
TS axle plate with long torque arm


 

With the Speedhub Finder refer to the five steps right Rohloff SPEEDHUB 500/14 and all attachments additional for your bike:

https://www.rohloff.de/en/service/speedhub-finder/

For the execution of Speedhubfinder you need on your computer the Flash Player.

Further technical information can be found at www.rohloff.de.

Spoke-Info:

The SPEEDHUB absolutely requires the spokes bow 2.9mm and burr-free heads.
Other spoke bows or spoke head damage can cause damage in the spoke hole of the hub, with possible subsequent fatigue fractures of the spoke flange. Previous spokes had in the aftermarket for at least 20 years always the spoke bow 2.9 mm. Since spoke manufacturers like DT Swiss (2.4mm) and Sapim (2.6mm) have changed this, a spoke with 2.9mm spoke bow is now a special spoke. This must now be ordered from Rohloff.

For this reason we supply Rohloff hubs in general only with suitable spokes incl. Secure-Lock Nipples.

Spoke lengths based on the rim ERD (Effective Rim Diameter): https://www.rohloff.de/fileadmin/user_upload/135_142_erd_32_36_Speichenlaenge_04_2016_de_en.pdf

If the ERD or the required spoke length is not in the list, please ask us before ordering.